Every pool has to be maintained from time to time regardless of how much it has been used. You can do this by focusing on the maintenance needs of your pool equipment. The basic maintenance falls within the 3 C’s of pool maintenance.


First, you need to clean your pool and pool equipment. You have to check and clean every part of your basic pool system.Check for leaks and identify places or any pool equipment that needs repairs.Always remember that prevention is always better. Also, take note of the following:

  • Always follow scheduled monitoring of the filter and cleaning it.
  • Make or create a weekly maintenance and cleaning schedule for the grids and cartridges.
  • Make sure the pressure gauges are all accurate and are all working fine and properly.

Familiarize yourself with basic pressure reading while your pool is in good or pristine shape or condition.This will be the determiner if the pool needs to be cleaned, repaired, or maintained.

The pressure gauges will always indicate if the filters need to be replaced.Also, a rule is to clean your cartridges when the gauge of the PSI is higher than the normal scale. Remember that the pressure gauges are one of the most important parts of this pool equipment.


The second is Circulation. Water needs to be kept circulating or else, the buildup could occur. It might be a buildup of algae or pathogens or bacteria that could cause clouding and blurring of the water.Sand, dirt, and other debris from the environment could clog the pool.So you need to always check on those things to keep your pool and pool equipment working properly. Proper pool pump repair is essential.

  • Purchase the optional heavy-duty shaft seal on your pump.
  • Use an oversized salt system.
  • Use a heater that has a cupro-nickel heat exchanger.


The last C to remember is Chemistry. Managing the pool equipment that deals with chemicals is very important. Thus, the water balance or the makeup of the pool water should always be checked and maintained.

Always test the water for its pH level and alkaline level more or less twice a week. No matter what kind of sanitizer you use, you should keep the pH level between 7.2 and 7.6 while keeping your alkalinity between 100 to 150ppm. In short, keep the pool balanced at all times between these ranges because with balanced water, all the other chemicals will be balanced as well.

The more tests you do with your pool and its pH and alkaline level, the healthier it is. Owners should always run tests on the pH, chlorine, alkaline, and salt, as well as calcium hardness if able or necessary. Make it a habit of testing and balancing the waters in order to avoid any more problems or any corrosion on the pool.Also, you can avoid any or some health and hygiene problems like itching, rashes, and many more skin irritations.

Overall, the pool and your pool equipment must be maintained and checked as much and soon as possible. Being prepared and ready is always good to prevent a lot of costly problems. Our Orlando pool equipment company has the right people to serve all your needs.

Leave a Reply

Your email address will not be published. Required fields are marked *